Moly Coating / Mos2 Coating service

A dry lubricant coating contains molybdenum. This coating to be done after Nitriding, Phasphating, or sand/grit/glass beed blasting. It will have good adhesion on well prepared pre treated surface. This is a heat curing coating, so after the coating and drying the parts are to be cured at 150 to 200 degree C for minimum 1 hour to have good bonding on the surface. Molykote can be applied by conventional painting method like spraying, dipping or brushing. The layer thickness can be adjustable with dilution and application method.

Advantages

Since it is a dry lubricant it does not pick up dust/dirt like oil or grease and it is provides excellent corrosion resistance as compared to plating.

Better sliding property and wear resistance and reduces co-efficient of friction.

Reduces frictional and with stand in high contact load as compare to oil/grease.

It is provides permanent lubrication due to that, increasing the life of the coated parts.

For best wear & tear resistance and to reduce frictional tourque contact us, Friction Technologies will provide best coating solution!!